December 2006 Modifications

 

 

 

Jump back

Carbon trans panel

Boot lid vent

   

Finishing the Side pod

Engine cover progress
   

Regulator/catch tank mods

Transmission
   

Gurney Flaps

GRP Pods

 

Please note there are a fair few images this month... May take a while to load them all.

 

Carbon fibre transmission tunnel panel, a story in 2 parts:

(1) Carbon item from ply template.

011206_1.jpg

011206_2.jpg

011206_3.jpg

(2) Drilling the mount holes and trial fit:

031206_1.jpg

031206_2.jpg

031206_3.jpg

031206_4.jpg

031206_5.jpg

Got as far as I can with this item... Need the engine in the bay to finish it up...

Back to top

Boot lid vent... A story in 4 parts:

(1) CAD Version.

boot_lid_vent_17122006_1.jpg

boot_lid_vent_17122006_2.jpg

boot_lid_vent_17122006_3.jpg

(2) Tried for size.

031206_6.jpg

031206_7.jpg

031206_8.jpg

(3) New boot panel plug.

091206_8.jpg

091206_9.jpg

091206_10.jpg

(4) Final shape & resin'd up - Round 1.

161206_8.jpg

161206_9.jpg

161206_10.jpg

161206_11.jpg

161206_12.jpg

161206_13.jpg

To be continued...

Back to top

Side pod finishing - I hope... In 9 parts:

(1) Really weird & nasty primer/filler stuff.

081206_1.jpg

081206_2.jpg

081206_3.jpg

(2) 600, 800, 1200 & 1500 wet and flippin dry later!

091206_1.jpg

091206_2.jpg

091206_3.jpg

091206_4.jpg

(3) The Tee-Cut version, Hmmmm, glossy.

091206_5.jpg

(4) Ten coats of wax later... the Gelcoat and mat goes on.

121206_1.jpg

121206_2.jpg

121206_3.jpg

(5) Glassed-in support frame.

131206_1.jpg

131206_2.jpg

131206_3.jpg

131206_4.jpg

131206_5.jpg

(6) Off the plug.

161206_1.jpg

161206_2.jpg

161206_3.jpg

161206_4.jpg

(7) And polished ready for waxing.

201206_1.jpg

201206_2.jpg

201206_3.jpg

(8) 'Modifying' the mould supports.

211206_1.jpg

211206_2.jpg

211206_3.jpg

(9) And finally. Until the Carbon items anyway...

231206_1.jpg

231206_2.jpg

231206_3.jpg

231206_4.jpg

231206_5.jpg

231206_6.jpg

231206_7.jpg

231206_8.jpg

231206_9.jpg

231206_10.jpg

Back to top

The engine cover... A story in 5 parts:

(1) All the lumps and bumps taken off.

091206_6.jpg

(2) Plan 'B'

engine_cover_plan_b_1.jpg

engine_cover_plan_b_2.jpg

engine_cover_plan_b_3.jpg

engine_cover_plan_b_4.jpg

(3) Plan 'B'... Resin'd up and waiting to be W&D'd.

151206_1.jpg

151206_2.jpg

151206_3.jpg

(4) Not too bad...

161206_5.jpg

161206_6.jpg

161206_7.jpg

(5) And again...

161206_14.jpg

161206_15.jpg

161206_16.jpg

To be continued...

Back to top

Fuel regulator & catch tank modifications.

081206_4.jpg

081206_5.jpg

081206_6.jpg

Back to top

Transmission.

221206_1.jpg

221206_2.jpg

221206_3.jpg

221206_4.jpg

221206_5.jpg

221206_6.jpg

221206_7.jpg

221206_8.jpg

221206_9.jpg

221206_11.jpg

221206_12.jpg

221206_13.jpg

Back to top

Gurney Flaps - A story in 7 parts:

(1) Gurney Flaps plug (CAD).

sidepod_gurney_flap_mould_dec061.jpg

sidepod_gurney_flap_mould_dec062.jpg

sidepod_gurney_flap_mould_dec063.jpg

(2) The plug 'shell'.

281206_1.jpg

281206_2.jpg

281206_3.jpg

281206_4.jpg

281206_5.jpg

281206_6.jpg

(3) Re-enforcement of the plug and end plate attachment lugs.

291206_12.jpg

291206_22.jpg

291206_32.jpg

291206_42.jpg

291206_52.jpg

291206_62.jpg

(4) Plug assembly (CAD).

gurney_flap_plug_assy1.jpg

gurney_flap_plug_assy2.jpg

gurney_flap_plug_assy3.jpg

(5) Plug end plates attached and the Plasticine fillet applied.

301206_7.jpg

301206_8.jpg

301206_9.jpg

301206_10.jpg

301206_11.jpg

(6) Mould (CAD).

sidepod_gurney_flap_plug_dec061.jpg

sidepod_gurney_flap_plug_dec062.jpg

sidepod_gurney_flap_plug_dec063.jpg

(7) The mould.

301206_14.jpg

301206_15.jpg

301206_16.jpg

Back to top

GRP Side pods ready for cutting to size and shape.

271206_1.jpg

271206_2.jpg

271206_3.jpg

First one cut and shaped!

301206_1.jpg

301206_2.jpg

301206_3.jpg

301206_4.jpg

301206_5.jpg

301206_6.jpg

Both done.

311206_7.jpg

311206_8.jpg

311206_9.jpg

And on the car.

311206_1.jpg

311206_2.jpg

311206_3.jpg

311206_4.jpg

311206_5.jpg

311206_6.jpg

Back to top

 

 

(c) Copyright 2000 - 2007 - J.B.Cobb